HP SR5559D manual Connecting the TV Signal Source When You Have an Existing Setup, Existing setup

Connecting the TV Signal Source When You Have an Existing Setup

This section describes how to connect the computer to an existing setup for the TV signal source.

Wall to VCR to TV, using coaxial cable

1Disconnect the coaxial cable from the input to the VCR, and connect it to the input of a coaxial cable signal splitter (not included; available at electronics stores).

2Connect two coaxial cables to the splitter outputs.

3Connect one of these cables to the input of the VCR, and the other cable to the TV connector on the back of the computer.

Existing setup Setting up the computer with a splitter

A Wall

B Cable outlet

C Coaxial cable

D VCR In

E VCR Out

F TV In

G Splitter In

H Splitter Out

J TV In on back of computer

44Advanced Setup Guide (features vary by model)