Adding or Replacing the HP Pocket Media or Diskette or Hard Disk Drive
1Complete the procedures to remove the HP Pocket Media, diskette (floppy), or hard disk drive, if necessary. See “Removing the HP Pocket Media or Diskette or Hard Disk Drive” on page 11.
2Slide the HP Pocket Media, diskette (floppy), or hard disk drive into the front of the chassis until it locks into place.
3Align the two screw holes on the chassis with the two screw holes on the side of the drive, and then attach the two screws. For the HP Pocket Media and diskette (floppy) drive, make sure to insert the screw into the holes labeled (1). For a hard disk drive, make sure to insert the screw into the holes labeled HDD.
Upgrading and Servicing Guide 13
