Display cable
Description | Spare part number |
|
|
Display cable |
|
|
|
Before removing the display cable, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Remove the
6.Disconnect the battery (see Battery on page 15).
Remove the display cable:
1.Release the ZIF connector (1) to which the touch controller cable is connected to the system board, disconnect the touch controller cable from the system board, and then place the touch controller cable
(2) clear of the display cable.
2.Release the ZIF connector (3) to which the display cable is connected to the system board, and then disconnect the display cable from the system board.
3.Release the ZIF connector (4) to which the display cable is connected to the display panel, and then disconnect the display cable from the display panel.
20 Chapter 5 Removal and replacement procedures
