Hardware Upgrades
SODIMM Installation
If your Thin Client can be upgraded with optional SODIMM memory, use the following instructions for an overview of this procedure.
ÄCAUTION:installation.If necessary, back up any data before continuing the
✎In addition to following these instructions, follow the instructions that are applicable to your specific Thin Client option.
1.Follow the applicable instructions in the “General Hardware Installation Sequence” section at the beginning of this chapter.
2.Access the Thin Client system board.
3.Remove any existing SODIMM if installed.
4.Install the module into the socket at a 45° angle 1 until it clicks, then snap the module 2 into position as shown.
Installing an optional SODIMM (T20 model shown)
5.Attach the side access panel.
6.Power up the Thin Client.
Hardware Reference Guide |