Security Provisions
Securing a T20 to a Tabletop or Counter
The T20 Thin Client can be secured to a tabletop or workspace counter to prevent the unit from being moved. To secure the Thin Client:
✎This procedure requires you to remove the base screws from the
T20 Thin Client and replace two of them with longer screws. Before beginning the procedure, locate two screws of the same thread as the screws you are replacing. These new screws should be long enough to go through the tabletop or counter, though the base, and back into the Thin Client.
1.Remove the base of the Thin Client by unscrewing the four screws at the bottom that secure the base to the unit.
2.Use the base of the Thin Client as a guide for
two holes on the tabletop or counter as shown in the following illustration.
Hardware Reference Guide |