Wireless Direct Setup
Use the Wireless Direct Setup page to enable devices within wireless range to connect to the product and print.
Figure 2-43 HP Device Toolbox, Networking tab — Wireless Direct Setup page
Network Identification
Use the Network Identification pane to configure the Host name and Domain name(s) used to identify the product on the network.
The values for Host name and Domain names are retrieved from the firmware, and displayed on this pane. The Networking firmware determines what Host name and Domain name(s) to use.
The information under Available Host name / Domain names is for information only and cannot be modified.
The text entries are disabled under certain circumstances. The following table defines when the entities are disabled:
Table 2-11 Network Identification pane – Text Entities
Text Entity | Disabled status |
|
|
Host name | Disabled if configured by BOOTP |
|
|
Domain name (IPv4/IPv6) | Disabled if configured by BOOTP, DHCPv4, or DHCPv6 |
|
|
ENWW | HP LaserJet software components for Windows | 91 |
