Playing an optical disc
1.Turn on the computer.
2.Press the release button (1) on the optical drive bezel to release the disc tray.
3.Pull out the tray (2).
4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5.Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6.Close the disc tray.
7.If you have not yet configured AutoPlay, as described in the following section, the AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
NOTE: For best results, be sure that your AC adapter is plugged into an external power source while playing a BD.
Configuring AutoPlay
1.Click Start > Default Programs > Change AutoPlay Settings.
2.Confirm that the Use AutoPlay for all media and devices check box is selected.
3.Click Choose a default, and then select one of the available options for each media type listed.
4.Click Save.
NOTE: For more information about AutoPlay, refer to Help and Support.
14 Chapter 5 Optical drive