ZCOM C I/F Library Routines
ZCONFIG (3X)
Configuration Data header.config
ZCOM_ZCONFIG_PORT (port configuration)
header.action |
|
|
ZcDSC_ALL_PARMS | (1) | - Set all operating modes |
|
| (Configuration, Baud Rate and |
| Port) | |
ZcDSC_CFG_MODE | (2) | - Set Configuration mode only |
|
| (Ecode, Sync, Mode, Parity) |
ZcDSC_BAUD_RATE | (3) | - Set Baud Rate mode only |
|
| (X.Clk, S.Clk, Baud Rate) |
ZcDSC_PORT_MODE | (4) | - Set Port mode only (Pmode) |
ZcDSC_BREAK_REQ | (5) | - Port Break request |
ZcDSC_SET_XMIT_LIMIT | (6) | - Modify port transmit limit |
ZcDSC_ENABLE_PORT | (7) | - Enable a port |
ZcDSC_DISABLE_PORT | (8) | - Disable a port |
header.tag1,
header.tag2 Any values.
data.setport.iftno
Interface card number (0, 1,...).
data.setport.portno
Port number in the interface card:
0..7 For Z7200A, Z7340A, and Z7400A ACC interface cards 0..3 For the Z7300A ACC interface card
0..1 For the Z7350A ACC interface card
data.setport.rcode
This field is for actions
2 - Use data in field \fIdata.setport.cnfg
data.setport.spare
202 | Chapter 4 |