HP UX 11i v2 I/O Cards manual 281

ZCOM C I/F Library Routines

ZPORT (3X)

The baud rate is split between two 4-bit parameters (for compatibility reasons). If the Baud 1 parameter is 0, then Baud 2 is used. Rates listed in bold are not available on the Z7350A or Z7340A ACC interface cards. The Z7200A card does not support baud rates above 76800 and the Z7400A card does not support rates above 128000.

Baud	Value	Rate	Value	Rate
1
	0000	Use Baud2	1000	19,200
	0001	300	1001	38,400
	0010	600	1010	48,000
	0011	1,200	1011	57,600
	0100	2,400	1100	76,800
	0101	4,800	1101	64,000
	0110	9,600	1110	128,000
	0111	14,400	1111	256,000
Baud	Value	Rate	Value	Rate
2
	0000	150	1000	768,000
	0001	56,000	1001	1,024,000
	0010	153,600	1010	1,228,800
	0011	307,200	1011	1,536,000
	0100	192,000	1100	1,544,000
	1010	614,400	1101	2,048,000
	0110	384,000	1110	Reserved
	0111	512,000	1111	Reserved
Pmod	PmodeValue	PmodeValue	Port mode
e

Chapter 4 281