∙On HP-UX libraries with more than one SCSI interface, the robotic control is not supported with EISA-SCSI card.
∙STK ACSLS libraries are supported in HP-UX, Windows, Solaris SPARC and IBM AIX Media Agents. However, it is possible for all other Data Protector Media Agents to control ACSLS robotics indirectly through the HP-UX, Windows, Solaris or IBM AIX Media Agent.
∙ADIC DAS libraries are supported in HP-UX and AIX Media Agents. However, it is possible for all other Data Protector Media Agents to control DAS robotics indirectly through the HP-UX or IBM AIX Media Agent.
∙On Novell NetWare, fibre channel attached devices must not have SCSI ID (or target ID) higher than 15.
∙Data Protector magazine support is available only with DDS and DLT tape drives.
∙Some devices do not support SCSI auto-configuration and must be configured manually.
∙Data Protector enables sharing of multi-drive libraries (libraries with more than one SCSI-II interface) between multiple systems and multiple cells, with robotic control running on an HP-UX, Windows, HP OpenVMS or Sun Solaris system.
∙Library drives and robotics can be shared between multiple cells using the Manager-of-Managers server cell and CMMDB (Centralized Media Management Database).
∙The library extension license is required for us of libraries with more than 60 slots.
∙Magneto-optical WORM (Write Once Read Many) media are not supported by Data Protector. Although all magneto-optical drives do support magneto-optical WORM media, only the magneto-optical re-writable media are supported by Data Protector.
∙Data Protector 6.20 supports STK VolSafe WORM media on all supported platforms with the STK9840 tape drive. HP LTO WORM media are supported on HP-UX, Linux, Solaris, Tru64 and HP OpenVMS operating systems. Please note that a “Tape
