===============================

Status: All Data Protector relevant processes/services up and running.

$ rg_test test cluster.conf stop service dps

Running in test mode. Stopping dps...

<info> Executing /opt/omni/sbin/omnisv stop

HP Data Protector services successfully stopped. <warning>Dropping node-wide NFS locks

<info> unmounting /dev/mapper/DP_Grp-DP_Vol (/FileShare) <info> Removing IPv4 address 10.10.1.9/24 from eth0 Stop of dps complete

$ /opt/omni/sbin/omnisv –status

ProcName Status [PID]

===============================

rds : Down

crs : Down

mmd : Down

kms : Down

omnitrig: Down

uiproxy : Down

Sending of traps disabled.

===============================

Status: At least one of Data Protector relevant processes/services is not running.

Deploying the Data Protector Cluster Cell Manager to live operation

The cluster Cell Manager created on the RHCS can be deployed in the real environment by starting the ‘cman’ and ‘rgmanager’ services as follow:

$service cman start

$service rgmanager start

To start the Data Protector cluster service on the primary node, execute the following command:

$/opt/omni/sbin/omnisv –start

Also try to relocate the Data Protector cluster service on the secondary node by running the relocate command.

11