Run the xomni command to check the DP GUI can be opened without any issue on the current node:

$/opt/omni/bin/xomni &

4.Stop the Data Protector services on the secondary node, unmount the shared disk on it, and mount it on the primary node by repeating the above step on the primary node.

Note: Create cluster resources using the cluster configuration tool (see the next section). $system-config-cluster

5.Import the virtual server client on to the Cell Manager.

$/opt/omni/bin/omnicc -import_host dpi00180.ipr.com –virtual

Now the Virtual Server acts as Cell Manager, as the following command shows: $/opt/omni/sbin/omnidbutil –show_cell_name

Catalog database owner: "dpi00180.ipr.com"

Creating the Data Protector Cluster resources

1.Log on to the Cluster Manager page using the following command: $system-config-cluster

2.Create the Virtual Server IP group, Shared Disk group, and DP service group followed by DP Services.

a.Enter the GFS resource name, mount point, and device. Selects “Force Unmount”, and then click OK.

6