HP V6115OM, V6110US manual Connecting a 1394 device, Stopping a 1394 device, Required 1394 software

Connecting a 1394 device

CAUTION To prevent damage to a 1394 port connector, use minimal force to connect a 1394 device.

To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You will hear a sound when the device has been detected.

NOTE The first time you connect a 1394 device, the "Found New Hardware" message is displayed in the notification area, at the far right of the taskbar.

Stopping a 1394 device

CAUTION To prevent loss of information or an unresponsive system, stop the 1394 device before removing it.

CAUTION To prevent damage to a 1394 connector, do not pull on the cable to disconnect the 1394 device.

To stop a 1394 device:

1.Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.

NOTE To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or <<) in the notification area.

2.Click the name of the device in the list.

3.Click Stop.

Required 1394 software

Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions.

4 Chapter 2 Using a 1394 device (select models only) ENWW