:OPERation:ENABle?
STATus:OPERation:ENABle? returns which bits in the event register (Operation
Status Group) are unmasked.
Comments • Reading the event register mask does not change the mask setting (STAT:OPER:ENAB <event>).
•Related Commands: STAT:OPER:ENABle
Example Reading the Event Register Mask
STAT:OPER:ENAB? | Query register mask. |
:OPERation[:EVENt]?
STATus:OPERation[:EVENt]? returns which bits in the event register (Operation Status Group) are set. The event register indicates when there has been a transition in the condition register.
Comments • Reading the event register clears the contents of the register. If the event register is to be used to generate a service request (SRQ), you should clear the register before enabling the SRQ (*SRE). This prevents an SRQ from occurring due to a previous event.
•Related Commands: STAT:OPER:ENABle, STAT:OPER:ENABle?
Example Reading the Event Register
STAT:OPER:EVEN? | Query returns bit(s) set. |
:PRESet
STATus:PRESet Sets the Operation Status Enable and Questionable Data Enable registers to 0. After executing this command, none of the events in the Operation Event or Questionable Event registers will be reported as a summary bit in either the Status Byte Group or Standard Event Group. STATus:PRESet does not clear either of the Event registers.
Example Presetting the Enable Register
STAT:PRES | Preset enable register. |
:QUEStionable :CONDition?
STATus:QUEStionable:CONDition? returns the state of the condition register in the Questionable Status Group. The state represents conditions which are part of an instrument’s operation.
Chapter 3 | Command Reference 25 |
