HP w2271d manual Vga

OSD MENU

Icon	Main Menu	Submenu	Description
		Sleep Timer	Provides the timer adjustment menu options:
			• Set Current Time-sets the current time in hours
				and minutes
			• Set Sleep Time-sets the time you want to place
				the monitor In sleep mode
			• Set on Time-sets the time you want the monitor
				to wake up from sleep mode
			• Timer-sets the Sleep Timer feature On or Off.
				The default setting Is Off
			• Sleep Now-Immediately sets the monitor to
				enter sleep mode
	Language		Selects the language in which the OSD menu Is
			displayed. The factory default Is English.
	Information		Selects and displays important information about
			the monitor.
		Current Settings	Provides the current input video mode.
		Recommended	Provides the recommended resolution mode and
		Settings	refresh rate for the monitor.
		Serial Number	Reports the serial number of the monitor. The serial
			number Is needed if contacting HP technical
			support.
		FW Version	Reports the firmware version of the monitor.
		Backlight Hours	Reports the total hours of backlight operation.
		Service Support	http://www.hp.com/support
	Factory Reset		Returns all OSD menu settings and DDC/CI
			controls to the factory default settings, except the
			Language.
	Source Control		Selects the video input signal. By priority of DVI,
	(on select models)		VGA.
		DVI	Selects DVI as the video input signal.
		VGA	Selects VGA as the video input signal.
		Default Source	Selects the default or primary video input signal
			when the monitor is connected to two active and
			valid video sources. The monitor will automatically
			determine the video format. The choices are:
			•	DVI
			•	VGA
		Auto-Switch Source	Turns the system's automatic video signal input to
			On or Off. The factory default is On.
	Exit		Exits the OSD menu screen.

ENWW Using the On-Screen Display (OSD) 15