HP X1010CA, X1020US, X1027AP, X1021AP, X1026AP manual Check the Telephone Number, Check the Dial Tone

Communications

Check the Telephone Number

Dial the telephone number on the telephone, verify that the remote modem is answering, then hang up.

Check the Dial Tone

If a modem receives a dial tone it does not recognize, the modem will not dial and will display a No Dial Tone error message.

■To set the modem to ignore all dial tones before dialing:

1.Select Start > Control Panel > Network and Internet Connections category.

2.From the See Also menu in the left column of the window, select Phone and Modem Options > Modems tab.

3.Select your modem > Properties button > Modem tab.

4.Clear the Wait For Dial Tone Before Dialing check box.

5.Select the OK button > OK button.

■If you continue to receive the No Dial Tone error message after clearing the check box:

1.Select Start > Control Panel > Network and Internet Connections category.

2.From the See Also menu in the left column of the Network and Internet Connections window, select Phone and Modem Options > Dialing Rules tab.

3.Select your location, then select the Edit button.

4.Select your location from the Country/Region list.

If you select a country or region that is not supported by the modem, the country configuration defaults to USA or UK.

5.Select the OK button.

6.In the Phone and Modem Options window, select the Modems tab.

7–8 Startup and Reference Guide—Part 2