installation

Connecting the hp digital projector sb21 to a

computersb21

Connect the power cord to the projector and a power outlet.

Start the projector; after a 30- second warm-up it will search for a video signal.

Connect the black end of the video cable to the projector.

If no video signal is found, you may need to set up the PC to send a video signal out the video port.

Connect the blue end of the video cable to the PC; optionally, to have the remote control function as a mouse, connect the USB connector to the PC.

CAUTION!

Unplugging the projector while the fan is running may reduce lamp life.

NOTE: For best performance, configure the display mode of your computer’s graphic card to 800×600 resolution. Ensure the timing of the display mode is compatible with the projector. Refer to the “hp sb21 compatibility modes” section on page 37.

12