Upgrading the projector

Updating the firmware

HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Check for updated versions at http://www.hp.com/support.

USB method

1.On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest file intended for the xp7010/xp7030 series projector.

2.Connect a USB cable (available from HP) to the USB port on the computer. Do not connect the cable to the projector at this point.

3.On the computer, run the file you downloaded by double-clicking the file.

4.Follow the on-screen instructions. When prompted, connect the USB cable to the projector.

NOTE: Be sure to follow the “new hardware found” instructions exactly as shown on-screen, or the firmware will not be updated.

Upgrading the projector 43