Maintaining the System

To manage the projector using the on-screen menu

The projector’s on-screen menu is described in detail in the projector manual. However, when you install a connectivity module, certain new menu entries are displayed in the on-screen menu.

New menu entries with module installed

Quick choice

Wireless Presenter

Displays information needed by Wireless

 

Presenter-to-Go so it can connect to the projector.

 

 

Input

(This menu was named “Connect” in early firmware

 

versions.)

 

 

Connectivity module

Shows the input signal from the current wired or

 

wireless presenter.

 

 

Setup

 

 

 

Enable sources

Sets whether input sources connected to the

Connectivity module

connectivity module are searched or ignored when

 

the projector searches for an input.

 

 

Help

 

 

 

About the network

Displays the current configuration of the wired and

 

wireless network ports on the connectivity module.

 

The wireless configuration and certain wired

 

settings must be changed using the Web interface.

 

See “To manage the projector from the Web” on

 

page 49.

 

 

48

User’s Guide