Maintaining the System

To manage the projector from the Web

When the projector is connected to a network, you can access the projector’s embedded Web server. You can check the projector’s current status, change

its configuration, and upgrade firmware. You can do this from a remote location—you do not have to be in the same room as the projector

The Web interface supports Microsoft Windows 2000 and XP, Mac OS 9 and 10, Internet Explorer 5.5 and above, and Netscape Navigator 7.0 and above.

1.On a networked computer, open an Internet Explorer or Netscape Navigator, enter the IP address of the projector in the URL bar, and press the Enter key. See “To find the projector’s address” on page 47 for more information.

2.Depending on the property you want to view or change, go to the location indicated in the following table.

3.Make any necessary changes and click Apply.

Managing projector properties

Home tab

Device Info

Shows projector and module information.

 

 

Select Language

Selects the language for these Web pages.

 

 

Projector tab

 

 

 

Power

Turns the projector on or off.

 

 

Quick Choice

Changes settings that are frequently used.

 

 

Input

Selects the input source to display.

 

 

Adjust Picture

Changes the appearance of the image.

 

 

Audio

Controls the sound output of the projector.

 

 

Setup

Sets the configuration of the projector.

 

 

Networking tab

 

 

 

Wireless Presenter

Sets the projector name and optional password for

 

connections from Wireless Presenter-to-Go.

 

 

User’s Guide

49