Connect each PDU to a dedicated (unshared) branch circuit that is rated for the continuous measured load of all the equipment connected to it. The total power load for a PDU should not exceed 80 percent of the branch circuit rating. If a PDU is not used, connect each piece of equipment within the rack to a dedicated branch circuit.

For additional information, see the HP website http://www.hp.com/og/powercapping.

Power options

The following table describes the available power options and provide details about those options.

Enclosure part

Source

Source voltage

Plug or

Circuit type

Power

number

type

(nominal)

connector

 

receptacle

 

 

 

type

 

required

 

 

 

 

 

 

412136-B2x

3-phase

200 to 220 VAC

NEMA L15-

30A 200/208V

L15-30R

412133-B2x

 

line to line (phase to

30p, 3-m

Three-phase

 

 

phase), 3-phase

(10-ft) power

delta

 

 

 

 

 

 

delta 50Hz/60Hz

cord

 

 

 

 

 

 

 

 

403318-B2x

3-phase

346 VAC to 415

IEC 309, 4-

16A 346-415V

IEC 309, 4-Pole,

403319-B2x

 

VAC line to line

pole, 5-wire,

 

5-Wire, red

 

 

Red, 3-m

 

 

 

 

200 VAC to 240

 

 

 

 

(10-ft) power

 

 

 

 

VAC line to neutral

 

 

 

 

cord

 

 

 

 

3-phase WYE

 

 

 

 

 

 

 

 

 

 

 

 

 

403320-B2x

Single-

100V to 120V AC

IEC 320

16A Single-

IEC320-C19*

403321-B2x

phase

200V to 240V AC

C19-C20

phase 100V to

 

 

1.2-m

120V or 200V

 

 

 

50Hz/60Hz

 

 

 

(4-ft) jumper

to 240V

 

 

 

 

 

 

 

 

cord

 

 

 

 

 

 

 

 

DC

-36 VDC to -72 VDC

6.4mm

45DG 4AWG

 

 

 

(0.25-in)

 

1/4 2H (Two-

 

 

 

studs for bolt

 

hole lug, 45-

 

 

 

down

 

degree bend,

 

 

 

conections

 

6.4-mm (0.25-in)

 

 

 

 

 

stud hole size,

 

 

 

 

 

16-mm (0.63-in)

 

 

 

 

 

hole spacing)

 

 

 

 

 

 

*Additional power cords are available for single-phase solutions. See the HP Website (http://www.hp.com/go/rackandpower).

All branch circuits used within a facility must be connected together to form a common ground. All power sources such as transformers, UPS devices, and other sources, must be connected together to form a common ground.

NOTE: When wiring a 3-phase enclosure, phase rotation is unimportant. However, the rotation must be consistent for both plugs.

Power redundancy

High-availability information technology equipment such as servers and storage devices can be configured with backup or redundant power sources and power supplies in either of the following configurations:

Power requirements and considerations 33

Page 33
Image 33
HP xw2x220c Blade manual Power options, Power redundancy

xw2x220c Blade specifications

The HP xw2x220c Blade is designed for organizations that require a high-performance, space-efficient computing solution. This blade server epitomizes the commitment to enhancing data center efficiency and maximizing computing power without compromising on reliability.

One of the standout features of the HP xw2x220c Blade is its compact form factor, which enables organizations to fit a substantial amount of computing power in a small footprint. This is particularly beneficial for businesses with limited space, as they can host more servers within the same physical environment. The blade is optimized for virtualization, allowing it to handle multiple workloads simultaneously, which translates to cost savings and better resource utilization.

The server is powered by advanced Intel Xeon processors, ensuring efficient processing capabilities for demanding applications. The HP xw2x220c Blade supports multiple CPU options, allowing organizations to select the configuration that best meets their workload requirements. Leveraging Intel's latest technologies, it offers enhanced performance while maintaining energy efficiency, which is a critical consideration in today’s environmentally conscious technological landscape.

In terms of memory, the xw2x220c Blade supports high-capacity DDR4 RAM, which enhances data access speeds and ensures smooth operation even during heavy loads. The architecture of the blade also includes advanced cooling technology that optimizes airflow to maintain optimal temperatures, thereby prolonging hardware lifespan and reliability.

Network connectivity is a vital feature, and the HP xw2x220c Blade offers multiple Ethernet ports for flexible networking options, as well as support for fibre channel connections. This enables seamless integration into existing network configurations, ensuring high-speed data transfer rates that are crucial for real-time applications.

Security features are also integrated into the HP xw2x220c Blade, including options for secure boot, system integrity verification, and advanced encryption capabilities. These attributes protect sensitive data from unauthorized access and potential breaches, which is essential for organizations dealing with confidential information.

In conclusion, the HP xw2x220c Blade is a formidable choice for businesses seeking a compact, powerful, and efficient computing solution. Its combination of advanced processing capabilities, extensive memory support, flexible networking options, and robust security features makes it well-suited for a variety of applications, making it an essential component for modern data centers.