HP xw2x220c Blade manual HP 10000 G2 rack specifications, Rack requirements

Specification	Value
Height	584.00 mm (23.00 in)
Depth	1013.00 mm (39.88 in)
Width	607.00 mm (23.88 in)
Standard enclosure weight *
Unboxed	65.80 kg (145.00 lb)
Shipping	88.50 kg (195.00 lb)
Maximum enclosure weight
Unboxed	136.00 kg (300.00 lb)
Shipping	158.80 kg (350.00 lb)

* Includes two power supplies, four fans, and one Onboard Administrator.

HP 10000 G2 rack specifications

For a current list of all rack specifications, see the Best Practices document on the HP website (http://www.hp.com/support/HP10000G2SeriesRack_Manuals).

Rack	Height	Width	Depth	Dynamic load	Static load
				(gross)
HP 10622	22U	600 mm (23.8	1000 mm (39.4	544.3 kg (1200	544.3 kg (1200
G2		in)	in)	lb)	lb)
HP 10636	36U	600 mm (23.8	1000 mm (39.4	689.5 kg (1520	907.2 kg (2000
G2		in)	in)	lb)	lb)
HP 10642	42U	600 mm (23.8	1000 mm (39.4	907.2 kg (2000	907.2 kg (2000
G2		in)	in)	lb)	lb)
HP 10647	47U	600 mm (23.8	1000 mm (39.4	Not applicable	907.2 kg (2000
G2		in)	in)		lb)
HP 10842	42U	800 mm (31.5	1000 mm (39.4	453.6 kg (1000	907.2 kg (2000
G2		in)	in)	lb)	lb)

Rack requirements

The enclosure is compatible with the following racks:

•All HP 10000 and 10000G2 Series racks except the HP 10614 rack. NOTE: The system is optimized for 10000 Series racks.

•Telco racks

If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

•Front and rear doors: If the rack includes closing front and rear doors, a minimum of 65 percent open area must be provided to ensure adequate airflow.

Hardware specifications and requirements 52