HP XW9400 manual Sata, Energy Star

QuickSpecs

HP xw9400 Workstation

System Technical Specifications

Possible Memory Configurations

Interfaces Supported	SATA	6 SATA interface (6 serial-ATA connectors), 8 SAS interface, 2 EIDE
		interface (1 EIDE connectors) supported for optical drives.
Serial Attached SCSI	Serial Attached SCSI (RAID 0, 1, IME) or SATA 3 Gb/s (RAID 0, 1)
Chassis Fan Header	Front: One 3.15 x 0.98 inches; 80 x 25 mm)
	Rear: One 4.72 x 0.98 inches; 120 x 25 mm (standard)
Power Supply	1050W custom power supply - (Wide Ranging, Active PFC)
Operating Voltage	1050W: 90 - 269 VAC
Range
Rated Voltage Range	1050W: 100 - 240 VAC; 118 VAC
Rated Line Frequency	1050W: 50/60 Hz; 400Hz
Operating Line	1050W: 47 - 66 Hz; 393-407 Hz
Frequency Range
Rated Input Current	1050W: 13.2 A @ 100-120VAC / 12.0A @ 118 VAC; 6.6 A @ 200-240 VAC
Heat Dissipation	1050W: Typical 3136 btu/hr (791 kg-cal/hr) ; Maximum 4480 btu/hr (1129 kg-cal/hr)
Power Supply Fan	92x32 mm variable speed
ENERGY STAR®	YES
qualified (Config
Dependent)
80 PLUS Compliant	YES

DA - 12594 Worldwide — Version 27 — May 8, 2009 Page 11