Mounting the Monitor
The monitor panel can be attached to a wall, optional swing arm, or other mounting fixture. Mounting solutions are sold separately.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1.Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 13.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a
2.To attach the monitor to an optional swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor.
Figure
To attach the monitor to other optional mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
3.Reconnect the cables to the monitor panel.
14 Chapter 2 Setting Up the Monitor