3 Machine components
|
| 2 | |
english | 1 | 3 | |
4 | |||
8 | |||
5 | |||
7 | |||
| |||
|
| 6 |
1Safety instructions
2Feed opening for CDs
3Safety element / splinter protection
4Operating and display unit
5Name plate
6Door
7Feed opening for paper and credit cards
8Light barrier
Operating and display elements
Reverse button
Display options:
Container full
Cutting unit blocked
Door open
Ready for operation
Operation button
4 Operation
Switching on the shredder
•Press the operation button.
The “Ready for operation” indicator lights up.
Shredding paper
•When you feed paper, the light barrier auto- matically starts the cutting unit.
Two seconds after the light barrier in the paper feed opening is free again, the cut- ting unit is switched off automatically and the shredder switches to standby.
Note:
You can fold the safety element upwards to shred larger quantities of paper. This makes it easier to access the feed opening.
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm)
•Switch the shredder to permanent mode: Press the operation button for four seconds.
•Only feed the material into the insertion slot of the safety element (splin- ter protection).
•Switch off permanent mode: Press the opera- tion button.
Note:
To completely separate the materials shredded, you can insert the CD bag supplied.
Shredding credit cards
Feed the cards through the CD slot when the cut size is 3.9 mm and 5.8 mm. For other ma- chines, use the opening for paper.
Switching off the shredder
•Press the operation button.
The “Ready for operation” indicator goes out.
10 | 0804 |