T-Mobile G1 User Guide R1.0 35 September 8, 2008
Pair & connect with Bluetooth devices
Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must
“pair”, then “connect”:
1Make sure you have turned Bluetooth on, as described in “Turn on Bluetooth services” on
page 34.
2Press HOME, then press MENU and select Settings > Wireless controls > Bluetooth settings.
3Your phone starts scanning for Bluetooth devices within range. As they are found, the devices
appear in the list of Bluetooth devices.
4To pair with a device in the list, select it.
5Type the device’s PIN, then select OK. (Read the manufacturer’s documentation if you don’t
know the PIN.)
6Once paired, select the device name to connect. You can also touch & hold the name to open the
context menu, then select Connect.
7Pairing and connection status appear under the device name.
8Once the other Bluetooth device shows “connected” status, you can start using it to make and
receive phone calls.
9To disconnect or unpair with a device, touch & hold the device to open the context menu. Select
Disconnect or Unpair, as appropriate. If you select Unpair when connected, you will be
disconnected as well.
Notes:
• The phone supports only the headset and hands-free Bluetooth profiles, so if you try to connect
to a device that is not a headset or hands-free car kit, then you will receive an “unable to
connect” message.
• If you pair with a second headset while connected to the first, the first headset will remain
connected. To switch connection to the second headset you must manually select that headset
again after pairing.
Rescan for Bluetooth devices
If you want to update the list of Bluetooth devices, press MENU and select Scan for devices.
Clear device list
If you want to disconnect, unpair, and remove the devices in the list, press MENU and select Clear
device list. Note that devices that were connected to your phone will remain paired and in the list
until you Clear device list again.