3. SIM/USIM Card Slot
Holds the Subscriber Identity Module/UMTS subscriber identity module (SIM/USIM) card.
Preparing the E219
Requirements for the Computer
To use the E219, the computer must meet the following requirements:
•USB Type A Receptacle, Compatible with USB 2.0 Full Speed
•Windows 2000 SP4, Windows XP SP2, Windows Vista, Mac OS
•Your computer’s hardware system should meet or exceed the recommended system requirements for the installed version of OS
•Resolution for the display: 800 × 600 or above
Installing the USIM/SIM Card
1.Remove the UMTS subscriber identity module/subscriber identity module (USIM/SIM) card slot from the E219.
2.Then insert the USIM/SIM card into the card slot.
3.Make sure that the USIM/SIM card is fully in place.
4.Insert the card slot into the E219.
3
1.Launch the DiGi Internet Connection Manager.
2.Go to ‘Tools’ > ‘Options’ > ‘Profile Management’
3.In the ‘Profile Management’ window, perform the setup as below:
•APN: 3gdgnet
•
