Hubbell LX3000 instruction manual Stop

Table 6-1 Troubleshooting (Continued)

Condition	Possible cause	Checks	Action
Engine does not crank	Remote switch faulty	Check switch and	Repair circuits
with Remote Start	Main Logic Board	switch circuits	Replace switch
Cranks when water	faulty	Check Main Logic	Replace Main logic
pressure decreases		Board	Board
Engine does not start	Power Sense Board or	Check Power Sense	Replace Power Sense
after AC power loss	Main Logic Board	Board	Board
	faulty
		Check Main Logic	Replace Main Logic
			Board
		Board
Engine does not stop	Another start condition	Check controller start
with optional AUTO	present	conditions
STOP	Main Logic Board	Check Main Logic	Replace Main Logic
	faulty	Board	Board

Note

The above troubleshooting guide does not represent all possible conditions or problems. If the above information can not resolve a problem, consult the factory or a local representative for further assistance.