Battery Charger
Introduction
The Power Sense Board monitors the charging current and voltage of both chargers. LED’s indicate that the chargers are supplying current output, that the battery / charger voltage is above 90%, and that AC Power is available to power the chargers.
Specifications
LED Indication |
|
READY, green | On indicates float condition |
CHARGING, yellow | On indicates charge in progress |
CHARGE CURRENT, green | Charging current greater than or equal to current indicated |
WARNING: Lead acid batteries generate explosive gases during normal operation.
Precautions: Do not work alone.
Wear eye protection and protective clothing.
Have soap and water available in case of skin contact with acid.
If acid enters eye, immediately flush eyes with cold running water for ten minutes and get medical attention.
If problems develop, check all connections and clean the battery terminal connections. Use the LED indicators on the chargers and the LOBC as an aid to determine the cause of any potential problems. Return faulty chargers to the factory.
CAUTION: Always disconnect the AC power source before disconnecting the batteries when performing maintenance.
