Huffy ATVUSB05 manual Do Not Over, Tighten, Install rod 7 through holes in bottom pole and eyebolt

6.Install rod (7) through holes in bottom pole section (6) and eyebolt (8).

6

8

7

4

5

7.Insert pole assembly into tank assembly as shown.

6

WARNING!
TWO PEOPLE REQUIRED	7
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT	8
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.

IMPORTANT!:

DO NOT OVER

TIGHTEN

8. Carefully place unit on its side. Secure pole bottom (6) to tank with anchor strap (52), washers (9 & 13) and nut (10) as shown. Upright unit.

NOTE:

Keep unnecessary pressure off of the pole assembly when in this position. Two people recommended for this procedure.

IMPORTANT!:

DO NOT OVER

TIGHTEN

6

1

9

13

10

52

11 01/04 P/N 214954E