1. Remove all contents from underside of tank. Keep tank (1) bottom side up
1
2. Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by tapping wheel downward with hammer, snapping it into position. Repeat for opposite side, then carefully, turn tank (1) over.
3
2 
1
3.Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step.
5
4
IDENTIFICATION STICKER
ÉTIQUETTE D'IDENTIFICATION MARKIERUNGSAUFKLEBER CALCOMANÍA DE IDENTIFICACIÓN
6
9 | 08/05 | P/N 21495407 |
