5. | Attach pole assembly to tank assembly as shown. Secure pole assembly to tank |
and wheel bracket by turning the pole assembly clockwise as shown. Tighten | |
pole completely and further rotate pole until struts are aligned correctly as shown | |
in FIG B. | |
| WARNING! |
| TWO PEOPLE REQUIRED |
| FOR THIS PROCEDURE. |
| FAILURE TO FOLLOW THIS |
| WARNING COULD RESULT |
| IN SERIOUS INJURY AND/OR |
| PROPERTY DAMAGE. |
| IMPORTANT! |
| The pole should be turned |
| approximately 7 complete |
| rotations to tighten properly. |
| When properly tightened, the |
| wheel bracket will be tight |
| against the base. An assistant |
| is recommended to hold the |
| base in place during this step. |
FIG B
ID# M611701 12/05 | 10 |
