7. Pole bracket (6) will need to be lightly pressed into backboard ribbing. Be sure to press completely into place. Attach rim (29) to backboard (31) and pole bracket (6) with knob (25), reinforcement
bracket (24), and carriage bolt (21) as shown. Tighten knob completely.
SAWHORSE OR SUPPORT TABLE
NOTE:
BOARD STYLE
MAY VARY
31
PRESS BRACKET
(6) INTO PLACE HERE
21
6
Carefully tip unit forward and slide backboard assembly onto pole as shown.
WARNING!
KNOB MUST BE TIGHTENED
COMPLETELY AND
CHECKED FOR TIGHTNESS
BEFORE EACH USE.
IMPORTANT!
NOTE ORIENTATION
24
29
25
SAWHORSE OR SUPPORT TABLE
11 | 12/05 ID# M611804 |
|
|
|
|
