2. While maintaining alignment, bounce pole top (4) and middle section (5) together as shown until they no longer move toward identification sticker. Upright assembly.
CAUTION!
THE IDENTIFICATION STICKER IS
LOCATED 5" FROM THE END OF
THE POLE. WHEN PROPERLY
POUNDED TOGETHER, THE POLE
SECTIONS SHOULD HAVE A
MINIMUM OVERLAP, LEAVING
BETWEEN THE OVERLAPPING
POLE AND THE IDENTIFICATION
STICKER.
IMPORTANT!
Align dimple of top pole section (4) into trough of middle pole section (5) as shown.
pole em | ID |
| STICKER |
5" |
|
| pole middle |
| |
| DIMPLE |
| HOLE |
5
4 
WOOD SCRAP
(NOT SUPPLIED)
ID# M731321 | 11/05 | 10 |
