Huffy M732201 manual Align dimple of top pole into trough of middle pole as shown

2. While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.

IMPORTANT!

Align dimple of top pole section (4) into trough of middle pole section (5) as shown.

pole em	ID
	STICKER
5"
	pole middle
	1-1/2"
	DIMPLE
	HOLE

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2"

BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

5

4

WOOD SCRAP

(NOT SUPPLIED)

ID# M732201 01/06 10