Huffy VP8100 manual Mark pole sections with tape not supplied as shown

3.Mark pole sections with tape (not supplied) as shown.

5

Tape (Not Supplied)

4

6

4.IMPORTANT! Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap, as shown, until the top pole no longer moves toward the taped reference mark on the middle pole. Upright assembly. NOTE: Pole sections should have a 3-1/2” (9 cm) overlap minimum.

5

4

WOOD SCRAP

(NOT SUPPLIED)

P/N 211636C 07/03 12