5.Bounce top (4) and middle (5) pole assembly onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the taped reference mark on the bottom pole. NOTE: Pole sections should have a
IMPORTANT!:
Holes in top (4) and bottom pole (6) sections MUST align to correctly position elevator system toward playing surface.
4
5
6
RODS SHOWN ARE
FOR VISUAL
REPRESENTATION
OF ALIGNMENT
AND ARE NOT
SUPPLIED WITH THE HARDWARE
WOOD SCRAP
(NOT SUPPLIED)
6.Insert bolts (7) into bracket (9) as shown. Install bolt (14) through bracket (9) and bottom pole section (6) and secure with nut (12) as shown.
14
7 |
9 |
6
12
9
13 | 07/03 | P/N 211636C |
