Front Panel 
8 | 9 |
1 TV LED(AMBER) | 5 STANDBY |
The LED lights on in TV mode.
2RADIO LED(GREEN)
The LED lights on in RADIO mode.
3DISPLAY
Shows service number, error messages, RCU commands and time in Standby mode.
Press to switch between Operation and Standby modes.
6TV/RADIO
Press to switch between TV and Radio modes.
7
, 
Use to change services down/up.
4 STANDBY LED(RED) | 8 | SLOT |
Indicates that the STB is under standby. |
| For a two CA Module with a smart card. |
|
| |
| 9 | SMART CARD |
|
| For a Smart cards. |
Rear Panel 
1LNB IN
Use to connect an antenna.
2LNB OUT
Use it when connecting to another STB.
3RS-232C
Use it when connecting to your PC.
4TV SCART
For the audio/video input of the TV.
5VCR SCART
For the VCR.
6AUDIO/VIDEO OUTPUT
Audio/video signal from your STB to VCR or TV.
70/12V OUT
For an external LNB switch.
8RF OUTPUT
Use to connect a RF signal from your STB to RF(ANT) input jack on your TV.
9RF INPUT
Use to connect a general Aerial Antenna and CABLE jacks to a RF input jack on the STB.
10S/PDIF
Output for connection to a digital amplifier.
E8
