Humax VA-5200 manual TV only, TV with VCR, With Hi-Fi System

STB Connections

There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results:

TV only

1.Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV.

2.Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV.

3.Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial channels.

4.Connect the coaxial cable from the LNB to the LNB IN socket on the STB.

TV with VCR

1.Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV.

2.Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR.

3.Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your VCR.

4.Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to the RF IN connector on your TV.

5.Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial channels.

6.Connect the coaxial cable from the LNB to the LNB IN socket on the STB.

With Hi-Fi System

1.Connect an RCA/Cinch stereo cable from the AUDIO L, R sockets on the back of the STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system.

E9