Alarm Tone, Setup Menu Tab | Humminbird 531444-1

531444-1_A - 323_Man_English.qxd 11/5/2005 12:33 PM Page 50

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief tone will be produced as you adjust the Alarm Tone so that you can select the tone that you can hear best.

To change the Alarm Tone setting:

1.Highlight Alarm Tone on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting. (High, Medium, Low, Default = Medium)

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode, whether it is an International model, or whether a Temp/Speed is currently connected.

Setup Menu

Page 26

Image 26

Humminbird 531444-1_A Setup Menu Tab, To change the Alarm Tone setting, Highlight Alarm Tone on the Alarms main menu

Contents

Operations Manual Table of Contents Thank You Troubleshooting Alarms Menu TabSetup Menu Tab Specifications Glossary Contact Humminbird How Sonar Works DualBeam Plus Sonar Soft Bottom RTS Real Time Sonar Window What’s On the DisplayBait Ball Hard Bottom Rocky Bottom Temperature water Do Not print this Views Sonar View Freeze Frame Understanding Sonar HistoryReal Time Sonar RTS Window Bottom Presentation Sonar Zoom View 200/83 kHz Split Sonar View Key Functions POWER/LIGHT KeyBig Digits View Circular Flasher View WAY Cursor Control Key Powering Up the UnitMenu Key Exit Key Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Menu System Simulator Start-Up Options MenuNormal Operation System Status Sonar X-PressTMMenu Accessory Test lists the accessories connected to SystemExit System Status by powering your Fishing System off Operation and the input voltage Sensitivity To adjust the SensitivityTo adjust the Upper Range Upper Range To adjust the Chart Speed Chart SpeedTo adjust the Lower Range Lower Range Bottom Range Zoom LevelBottom Lock To use Beam Select Sonar Menu TabBeam Select Highlight Beam Select on the Sonar main menu Fish ID+TM To change the Fish ID Sensitivity settingTo change the RTS Window setting Fish ID Sensitivity Depth Lines Zoom WidthKHz Sensitivity Max Depth Surface ClutterNoise Filter Water Type Alarms Menu TabTo change the Water Type setting Low Battery Alarm Depth AlarmFish ID Alarm Temp Alarm To change the Alarm Tone setting Alarm ToneSetup Menu Tab Highlight Alarm Tone on the Alarms main menu Units Temp User ModeUnits Depth Units Distance Select Views Triplog ResetRestore Defaults Temp Offset Select ReadoutsDepth Offset Speed Calibration TroubleshootingTo change the Speed Calibration setting Finding the Cause of Noise Display ProblemsProblem Possible Cause Isolation Sonar Terms SpecificationsGlossary 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM Receiver See Transmitter 531444-1A 323ManEnglish.qxd 11/5/2005 1234 PM Contact Humminbird

Humminbird 531444-1_A, 323, 300 series manual Setup Menu Tab, To change the Alarm Tone setting

Models: 323 300 series 531444-1_A

Alarm Tone

To change the Alarm Tone setting:

1.Highlight Alarm Tone on the Alarms main menu.

Setup Menu Tab