Humminbird 300 series, 323 manual Menu Key, WAY Cursor Control Key, Exit Key, Powering Up the Unit

531444-1_A - 323_Man_English.qxd 11/5/2005 12:33 PM Page 24

MENU Key

The MENU key is used to access the menu system.

Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start-Up Options menu.

X-PressTMMenu - Press the MENU key once for the Sonar X-PressTMMenu. The X-PressTMMenu allows you to access frequently-used settings without having to navigate through the whole menu system. When the X-PressTMMenu is displayed, you can use the UP or DOWN Cursor keys to move to a particular menu choice. As soon as you alter a parameter (using the RIGHT or LEFT Cursor keys) the X-PressTMMenu will collapse temporarily, and the screen will update if it is affected by your menu setting change, allowing you to see the effects of your action immediately. Reactivate the X-PressTMMenu by using the UP or DOWN Cursor keys.

Main Menu - Press the MENU key twice for the tabbed Main Menu System. The Main Menu System is organized under tabbed headings to help you find a specific menu item quickly: Alarms, Sonar, and Setup tabs are part of your tabbed Main Menu System. Use the LEFT or RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN or UP key to select the menu item, and the LEFT or RIGHT key to alter a menu setting.

4-WAY Cursor Control Key

The 4-Way Cursor Control Key has multiple functions, depending on the situation:

•Use the DOWN or UP arrow keys to select a menu choice from the menu list, then use the LEFT or RIGHT arrow keys to change a menu setting.

NOTE: Menu choices are implemented and saved immediately - no further action is required.

•In all Sonar views but the Big Digits view, pressing any 4-WAY Cursor Control key will activate Freeze Frame and will then allow you to position the cursor on the display.

EXIT Key

The EXIT key has multiple functions, depending on the situation:

•If an alarm is sounding, pressing EXIT will cancel the alarm.

•If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.

•If a menu is active, pressing EXIT will return to the previous level in the menu system.

•Pressing EXIT will cycle through the available views in reverse order.

•If Freeze Frame is active, pressing EXIT will return to a scrolling display.

	Powering Up the Unit
	Turn on your 300 Series™ Fishing System by
	pressing the POWER/LIGHT key. The Title screen is
3 2 3	displayed until the Fishing System begins
	operation. Your Fishing System will begin Normal
	or Simulator operation, depending on the presence
	or absence of a transducer.
323 Title Screen

17 18