Humminbird 77c manual System Status, PC Connect, Sonar X-Press Menu

M77_Man_Eng_531350-1_B.qxd 1/3/2005 4:30 PM Page 26

	System Status
	Use System Status to view system connections and
	to conduct a unit self-test.
	The following screens are displayed in turn when you
	press the VIEW button when using System Status:
	• Self Test
	• Accessory Test.
	Self Test displays results from the internal diagnostic
	self test, including unit serial number, Printed Circuit
	Board (PCB) serial number, software revision, total
System Status Self Test Screen	hours of operation and the input voltage.
	Accessory Test lists the accessories connected to
	the system.
	NOTE: The speed accessory will be detected only if the
	paddlewheel has moved since your Matrix™ Fishing
	System was powered up.
	Exit System Status by powering your Fishing
	System off.

System Status Accessory Test Screen

PC Connect (With PC Connect Cable Only)

Use PC Connect to update the software of the Matrix™ control head. This feature requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory.

NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.

Exit PC Connect mode by powering the Fishing System off.

Sonar X-Press™ Menu

The Sonar X-Press™ Menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-Press™ Menu.

NOTE: Upper Range only appears in Advanced User

Mode when in Sonar, Split Sonar or Big Digits View.

NOTE: Zoom Level only appears in Sonar Zoom View.

Sonar X-Press™ Menu

21 22