Humminbird HDR600 warranty

www..reelschel matic..com

The screw has a thread-locking compound on the threads to prevent loosening, and should not be fully tightened until all adjustments are made.

Adjusting The Running Position Of The Transducer

The running position of the transducer is now completely adjustable. Initially, adjust the transducer as described in this manual. Further adjustments may be necessary to tweak the installation after high speed testing. The metal bracket allows height and tilt adjustment, the pivot screws allow angular adjustment.

Adjust the angle of the transducer body first, so it is parallel with the hull of the boat, and fully tighten the two pivot screws using the supplied Allen wrench. Access to the pivot screws is provided by the lower holes in the side of the mounting bracket.