Humminbird LCR120 instruction

www..reelschel matic..com

fuse in the connection. If you must wire the control head directly to a battery, be sure to install an inline fuse holder

Image 16

Humminbird LCR120 manual

Contents

Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Alternate Transducers and Mounting Methods Portable MountingTrolling Motor Mounting Thru-Hull Mounting Beginning Installation Transducer Exchange Transom Installation Step One Determine Where to Mount the Transducer Step Two Drill the Mounting Holes Step Three Assemble the TransducerPage Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operation Test the Installation Testing the Installation Mounting the LCR Using the LCR Using the Built-In Simulator LCR 120 Functions LCR 120 Functions Factory Setting Fish symbols Units Sensitivity Bottom Alarm Fish Alarm Zoom Bottom Lock Using Bottom Lock Factory Setting Off Display Speed Setting Display Speed Depth Range Setting Depth Range Trip Log