www..reelschel matic..com

NOTE: The last function you select remains “active”- that is, you can adjust it without having to press SELECT again. For example, if the bottom alarm was the last function used, you can readjust the alarm by pressing one of the arrow buttons. Or, if you often use Zoom, you can select it once, then switch it on and off simply by pressing ON-OFF.

ID

1.Selecting ID;

Factory Setting: Fish symbols

ID identifies targets not attached to the bottom and displays them with either a fish symbol or an arch. Three different size symbols are used to represent the returned signal strength, a good indicator of fish size. Use the up and down arrow keys to switch between fish or arches, or use the ON-OFF key to disable ID.

Page 24
Image 24
Humminbird LCR120 manual Factory Setting Fish symbols