Humminbird MATRIX 17, MATRIX 37, Matrix 20, MATRIX 12 manual Units Depth, Units Temp, Units Distance

.	m		.com
www.reelschel
	Setup Menu Taticb			.
	From any view, press the MENU key twice to access
	the tabbed Main Menu System, then press the
	RIGHT cursor key until the Setup tab is selected.
	NOTE:
	Units - Temp		(International Models Only)
	Units - Distance	(If Temp/Speed or GPS Receiver is Connected)
	Units - Speed	(If Temp/Speed or GPS Receiver is Connected))
	Triplog Reset	(If Temp/Speed or GPS Receiver is Connected))
	Language		(International Models Only)
	Select Views			(Advanced)
	Select Readouts			(Advanced)
	Depth Offset			(Advanced)
	Temp Offset			(Advanced)
	Speed Calibration	(Advanced, only if Temp/Speed is Connected)
	NMEA Output			(Advanced)

Setup Menu Tab

Units - Depth

Units - Depth selects the units of measure for all depth- related readouts.

To change the Units - Depth setting:

1.Highlight Units - Depth on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting. (Meters [International Models Only], Feet, Fathoms; Default is Meters for International models, and Feet for Domestic models)

Units - Temp

(International Only)

Units - Temp selects the units of measure for all temperature-related readouts.

International Models Only.

To change the Units - Temp setting:

1.Highlight Units - Temp on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)

Units - Distance

(with Temp/Speed or GPS Receiver)

Units - Distance selects the units of measure for all distance-related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, or if a GPS Receiver is connected.

To change the Units - Distance setting:

1.Highlight Units - Distance on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

39 40