Control Head
Washers
Gimbal Knob

CASE ASSEMBLY

INTRODUCTION / ATTACHING THE CONTROL HEAD

Introduction to CASE ASSEMBLY

The Piranha Portable is available in several different configurations. You may have purchased the portable case complete with a Piranha unit ready for opera- tion.

A Piranha control head you already own may also be used with the portable case.

The Piranha Portable contains the portable case, a removable power cable, transducer with 15 feet of

cable, the suction cup transducer mounting kit, and various connecting hardware.

This manual serves for all applications, so there may be some minor differences between the manual and the actual hardware included, depending on the configura- tion you purchased.

Piranha Portables are sold with the Piranha 1, 2, 2x, 4, 4x Control heads. The PTC Portable Piranha kit is adaptable to all Piranha fishfinders.

PIRANHA PORTABLE CASE ASSEMBLY

Case Assembly Overview

In the following step-by-step procedures the following portable case assembly tasks are described, and must be

performed in order:

1. Attaching the control head

Pivot Knuckle

2. Assembling the transducer mount

Thumbknob

3.Attaching the transducer

cable

4. Installing the batteries.

 

Cable Cover

 

and

 

Non-skid

Rubber Cable Cover tab

base.

 

2

Page 4
Image 4
Humminbird manual Piranha Portable Case Assembly, Case Assembly Overview