MEMORY CHANNELS
USING MEMORY CHANNELS
The VHF5 has 10 memory locations
To access the memory channels, press the MEMO/M.PRG button. The LCD displays the channel number on the left, and the memory location in smaller numbers to the right. Turn the CHL/SQL knob to select a memory channel. To exit the memory channel mode, press the MEMO/M.PRG button again.
Programming Memory Channels
To enter channels into memory:
1.Press the MEMO/M.PRG button.
2.Press and hold the FUNC button then press the MEMO/M.PRG button. The memory location number begins to flash.
3.Rotate the chl/sql knob to the desired memory location.
4.Press the MEMO/M.PRG button. The channel number begins to flash.
5.Press the BAND/HI/LO button to select either the USA, Weather, or International band for the channel you wish to store.
6.Rotate the CHL/SQL knob to the desired channel for this memory location.
7.Press and hold the FUNC button then press the MEMO/M.PRG button to save the memory location and exit programming.
8.To store additional memory channels, repeat the above procedure.
Press the MEMO/M.PRG button to exit the memory channel mode.
Scanning Memory Channels
To scan the memory channels, press the MEMO/M.PRG button, then press and hold the SCAN/DUAL button for a few seconds. SCAN appears on the LCD as the radio scans the memory channels, stopping on an active channel. Press the SCAN/DUAL
button again to exit.
11
