Hunter Fan 22360 warranty Operation And Care, To Reverse The Flow Of Air

Operation And Care

1.The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off.

•Pull the chain slowly to change settings.

•Release slowly to prevent the chain from recoiling into the blades.

•The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector (see Fig. 18).

2.The light pull chain controls power to the light. The pull chain has two settings: On and Off.

3.For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum cleaner brush nozzle can remove heavier dust. Remove surface smudges or accumulated dirt and dust using a mild detergent and a slightly dampened cloth. You may use an artistic agent, but never abrasive cleaning agents as they will damage the finish.

4.Clean wood finish blades with a furniture polishing cloth. Occasionally, apply a light coat of furniture polish for added protection and beauty.

To Reverse The Flow Of Air.

1.Move the directional lever all the way to the left side for down draft (see Fig. 19).

2.Move the directional lever all the way to the right side for up draft (see Fig. 19).

14

DOWN UP

Pull Chain	Directional
	Lever

Fig. 19

Breakaway

Connector

Fig. 18

Hunter Fan Company 42704-01 • 01/29/07