Installation Instructions
For Hunter Ceiling Fan Light Kits
Preparing for Installation
CAUTIONS
·Read entire text carefully before beginning installation and save these instructions.
·To reduce the risk of electrical shock, install this light kit only on listed Hunter ceiling fan model numbers 28420, 28421, 28422, 28445, 28448, and 28449.
WARNINGS
·To avoid possible electrical shock, before installing light fixtures, disconnect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit breakers in theoff position, securely fasten a prominent warning device, such as a tag, to the service panel.
·Connect house wiring to the fan before attaching the light fixture to the fan.
·All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should use a qualified electrician. Professional installation is recommended.
1.Unassemble the fan switch housing as shown in Figure 1.
2.Disconnect the upper and lower plug connectors between the upper switch housing and lower switch housing.
Note: Do not discard any parts. You will need to replace it if you remove the light fixture in the future.
| Upper Switch | |
| Housing | |
| Switch | |
| Housing | |
| Assembly | |
| Screws | |
| Lower | |
| Switch | |
| Housing | |
Switch |
| |
Housing |
| |
Cover | Plug Button | |
Plate | ||
|
Figure 1 - Unassembling the fan switch housing
© 2004 Hunter Fan Company | 1 |
